Rotary / Semi-rotary (intermittent) letterpress label printing machine LLR-360 series
Link Label's rotary / semi-rotary (intermittent) letterpress label printing machine consists of 2 series:
1. LLR-300 Type: This model is shaft-driven by the three main motors.
2. LLR- 320/360 Type: This model has individual servo motor driven printing units with servo control.
- Auto register system.
- No need to have many different sizes of printing cylinders.
- Preparations time is short and to change for the next job only takes 15 min to start another production, thus also reducing the material loss to minimum.
- Machine is easy to operate and use the HMI (Human Interface) touch panel to switch with 3 kind of process type (full-rotary / semi-rotary / 2nd pass).
- Automatic lubricating system.
- These machines are designed for 24/7 production with very stable printing performance and low need of consumables.
- Our unique patented cylinder design allows one time take off all cylinders from the unit.
- The cleaning system allows you to change the printing color without the need to install the wash blade.
- The operator only needs to whirl the blade on the roller, which makes changing the color simple and faster.
The intermittent (semi-rotary) label printing machine allows a high flexibility in your production process. If the printing size allows full rotary printing (see specifications below) you will run at maximum speed. In case the printing dimension is smaller (see specifications below) you just need to select intermittent feeding on the HMI panel (Human interface), the program will auto calculate and, depending on the type of web-material, it's printing speed can reach up to 200~300 RPM/min. When the required printing size reaches the full rotary size, the processing mode will have to be switched to full rotary, and machine can run with the high speed.
||1. Full rotary letterpress printing
2. Intermittent letterpress printing
||Resin letterpress plate
Shore hardness 55° ~ 65°
|Number of Printing Units
||2 ~ 8 colors
|Max. Printing Area
||1. Full Rotary W300mm x 320mm
2. Intermittent W300mm x 260mm
||1. Full Rotary 64m/min
2. Intermittent 160mm run 200 rpm
3. 2nd pass 30~150mm / 130rpm
||60mm ~ 320mm
|Max Reel Paper Diameter
|Proportion The Printing Plate
||100 : 98.66%
|Plate Fitting Way
||Double side tape (thickness 0.12mm)